Priručnik AEG EXE 460 Nasumična orbitalna brusilica

Priručnik

5

.........................460 W

............8000-11000 min

-1

.............................7 mm

................ 125/150* mm

..........................2,3 kg

.......................< 2,5 m/s

2

...........................82 dB (A)

ENGLISH

TECHNICAL DATA

Nominal power output ...........................................................

No load oscillation frequency ................................................

Orbital travel diameter ...........................................................

Dimensions of grinding plate* ................................................

Weight without cable .............................................................

Typical weighted acceleration in the hand-arm area .............

Typical A-weighted sound levels:

Sound pressure level ..........................................................

The noise level when working can exceed 85 dB (A).

Wear ear protectors!

Measured values determined according to EN 50 144.

*Depending on equipment

SAFETY INSTRUCTIONS

Please pay attention to the safety instructions in the

attached leaflet!

Appliances used at many different locations including open

air must be connected via a current surge preventing switch.

Always wear goggles when using the machine. It is

recommended to wear gloves, sturdy non slipping shoes

and apron.

Always disconnect the plug from the socket before carrying

out any work on the machine.

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the machine.

Always lead the cable away behind you.

Before use check machine, cable, and plug for any

damages or material fatigue. Repairs should only be carried

out by authorised Service Agents.

Dust that arises when working in wood or using the tool on

material can be dangerous to health. In this case connect

the tool to a suction device.

Do not use machines on any material containing asbestos.

This machine is suitable only for dry sanding.

SPECIFIED CONDITIONS OF USE

This eccentric sander is a versatile machine. The following

work can be carried out with it: Coarse sanding and

grinding, Fine sanding and polishing, Rubbing down

weather-beaten paint, Rubbing down weather-beaten paint,

Polishing up scratches on acrylic glass, Etc.

Do not use this product in any other way as stated for

normal use.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is

in conformity with the following standards or standardized

documents. EN 50144, EN 55014-1, EN 55014-2,

EN 61000-3-2, EN 61000-3-3, in accordance with the

regulations 98/37/EC, 89/336/EEC

Rainer Warnicki

Manager Product Marketing

and Development

MAINS CONNECTION

Connect only to single-phase a.c. current and only to the

system voltage indicated on the rating plate. It is also

possible to connect to sockets without an earthing contact

as the design conforms to safety class II.

ADVICE FOR OPERATION

Only use original AEG sanding and polishing tools with self-

adhesive velcro fastening.

The sleeve has at the same time the effect of a disk break.

If the effect of the break diminishes (uncontrolled uprising of

the disk brake) change the sleeve.

MAINTENANCE

The ventilation slots of the machine must be kept clear at all

times.

Use only AEG accessories and spare parts. Should

components need to be replaced which have not been

described, please contact one of our service agents (see

our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered.

Please state the Article No. as well as the machine type

printed on the label and order the drawing at your local

service agents or directly at: Atlas Copco Electric Tools

GmbH, Postfach 320, D-71361 Winnenden.

SYMBOLS

Always disconnect the plug from the socket

before carrying out any work on the

machine.

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj AEG EXE 460 Nasumična orbitalna brusilica. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate AEG. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj AEG EXE 460 Nasumična orbitalna brusilica na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za AEG Nasumične orbitalne brusilice
Više priručnika za Nasumične orbitalne brusilice

Često postavljana pitanja o AEG EXE 460 Nasumična orbitalna brusilica

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

AEG EX 125 E Nasumična orbitalna brusilica

Priručnik

AEG EX 150 ES Nasumična orbitalna brusilica

Priručnik

AEG BEX 18-125 Nasumična orbitalna brusilica

Priručnik

AEG EX 125 ES Nasumična orbitalna brusilica

Priručnik

AEG EX 150 E Nasumična orbitalna brusilica

Priručnik

Parkside IAN 421948 Nasumična orbitalna brusilica

Priručnik

Skil 3745 CA Nasumična orbitalna brusilica

Priručnik

Skil 7480 DA Nasumična orbitalna brusilica

Povezane kategorije