Priručnik Crivit IAN 292844 Ciklokompjuter

Priručnik

GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY

GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY

GB/CY GB/CY GB/CY GB/CY GB/CY GB/CY HR

HR

GB/CY

Pritisnite MODE-tipku

13

više puta, da biste listali

kroz različite funkcije (vidi poglavlje „Korištenje

funkcija“). Pritisnite i držite SET-tipku

19

, kako biste

pozvali pohranjene vrijednosti ili ih vratili na početne

postavke.

Računalo za bicikl raspolaže sa sljedećim

funkcijama:

ADVANCE-modus: pritiskanjem MODE-tipke

13

možete birati iz sljedećih prikaza

funkcija:

CLOCK > TOTALODO > TOTAL-TM > TRIPDIST

>MAXSPEED > AVGSPEED > TRIPTIME > TEMP >

STPWATCH > CAL RATE > CALORIE > FAT-BURN

> CO2 KG >FUELSAVE > ETA > KM+/- > TIME+/-

> SCAN

– Automatska funkcija startanja

– ETA (očekivano vrijeme dolaska)–distanca

– očekivano vrijeme dolaska

– Ušteda goriva

– Stražnje svjetlo UKLJUČENO / ISKLJUČENO

Sastavni dijelovi

1

Magnet

2

Kabelska vezica

3

Baterija

4

Držač

5

Senzor

6

Amortizer držača računala za bicikl

7

Poklopac za baterije računala za bicikl

8

Računalo za bicikl

9

Primarni prikaz funkcijskih vrijednosti

10

Prikaz funkcije

11

Sekundarni prikaz funkcijskih vrijednosti

12

LC–zaslon

13

MODE-tipka (M)

Replacing the battery

Note: The bicycle computer battery must be

replaced when the battery state indicator

17

is

shown on the LC display . Press and hold the MODE

button

13

first and hold the SET button

19

at the

same time and keep them pressed until the battery

symbol and {{----}} are shown on the LC display. To

replace the battery, proceed as shown in figure A.

Open the battery compartment by turning the battery

cap anticlockwise towards to the icon using a co

in.

Remove the old battery and replace this with a new

battery. Please note the polarity when inserting the

battery. This is shown in the battery compartment.

Ensure that the O-ring is attached correctly before

inserting the battery. Turn the battery cap clockwise

towards to the icon onto the battery compartme

nt

using a coin to close it. Press and hold any button

to return to normal operating mode.

Note: When the battery has been removed, all i

nfor-

mation will be deleted after approx. 20 seconds.

Initial use

Changing basic settings

Basic settings: Language > Application profile

>Tyre size > Unit of length > Age > Unit of weight

> Weight > Time format > Time > Date format >

Date > CO2 saved >Maintenance interval >Light

ON / OFF > ETA distance > ETA mode > Fuel format

> Fuel cons > Unit of temperature

Important functions

MODE button

13

to configure values / SET button

19

to edit and adopt settings

- Language: 6 language can be select.

- Application profile: ADVANCE or EASY can be

select.

- Tyre size: Enter the circumference for your tyres

sizs in mm, 4 digit number can be input.

HR

- Format goriva: odabir između LITER (litra) i

GALLON (galon).

- Potrošnja goriva: unos troznamenkastog broja.

- Jedinica temperature: odabir između °C i °F.

Potvrdite Vaš odabir pritiskom na SET-tipku

19

. Pri-

tisnite MODE-tipku

13

da biste okončali podešava-

nje postavki. Sada ste uspješno podesili osnovne

postavke.

Ako želite promijeniti osnovne postavke, slijedite

korake u poglavlju "Vraćanje računala za bicikl na

početne postavke" i ponovno podesite sve osnovne

postavke.

Korištenje računala za bicikl

Napomena: računalo za bicikl automatski pre-

bacuje u standby-modus, ako se nije koristio duže od

5 minuta. Pritiskanje neke tipke ili vibracija ponovno

aktiviraju računalo. Prikaz funkcije pokazuje aktualni

modus

Funkcije

– Jezici izbornika: GB, DE, FR, NL, IT, ES

– Sat

– Štoperica

– Prikaz temperature °C / °F

– Funkcija memorije za min. i maks. temperaturu

– Prikaz brzine vožnje (0–99,9 km / h)

– Prikaz prosječne brzine (0–99,9 km / h)

– Najveća brzina (0–99,9 km / h)

– Usporedba brzine

– Trend brzine

– Tajmer za vrijeme vožnje (maks. 9:59:59)

(odbrojava ili broji)

– Brojač kilometara (odbrojava ili broji)

– Prikaz ukupnih kilometara i ukupnog vremena

vožnje

– Brojač kalorija

– Prikaz sagorijevanja masnoće

– CO2-ušteda

– Prikaz skeniranja (funkcije se međusobno povežu)

HRGB/CY

Press the SET button

19

to confirm your entry. Press

the MODE button

13

to proceed to the next function

and repeat the steps as described above.

Press the MODE button

13

to exit settings.

Using the backlight

Press the SET button

19

to temporarily activate the

backlight. The backlight will switch off automatically

after a short amount of time.

Resetting the bicycle computer

Press and hold the SET button

19

first and hold the

MODE button

13

to proceed to setting mode. SET-

TING OPEN or SETTING RESET will be displayed.

Press the MODE button

13

until SETTING RESET

displayed, Confirm reset the product by press the

SET button

19

.

Now you can adjust the previously configured

basic settings (language, age, weight, time). Other

saved information will be deleted.

To open the battery compartment cover, use a

coin to assist you to turn the battery compartment

cover in anti-clockwise direction. Make sure

you fit the battery the right way round (polarity).

This is shown on the back side of the product.

To close the battery compartment cover, use a

coin to assist you to turn the battery compart-

ment cover in clockwise direction.

Attaching the bike computer

To attach the product, proceed as shown in

Figs. B to I.

Note: Make sure the cable is attached prop-

erly. It must not get caught in the spokes or rail

along them.

HR HR HR HR HR HR HR HR HR

HR

Bike Computer

Introduction

We congratulate you on the purchase of your new

product. You have chosen a high quality product.

The instructions for use are part of the product.

They contain important information concerning

safety, use and disposal. Before using the product,

please familiarise yourself with all of the safety

information and instructions for use. Only use the

product as described and for the specified applica-

tions. If you pass the product on to anyone else,

please ensure that you also pass on all the docu-

mentation with it.

Proper use

The product is intended for use as a bike computer.

Not for commercial use.

Functions

– Menu languages: GB, DE, FR, NL, IT, ES

– Clock

– Stopwatch

– Temperature display °C / °F

– Memory function for min. and max. temperature

– Bike speed display (0–99.9 km / h)

– Average speed display (0–99.9 km / h)

– Maximum speed display (0–99.9 km / h)

– Speed comparator

– Speed trend

– Trip timer (max. 9:59:59) (Countdown or for-

wardcounting)

– Odometer (Countdown or forward-counting)

– Total kilometer and total trip time display

– Calorie counter

– Fat burning display

– CO2 saved

– Scan display (functions are interconnected)

– Automatic start function

– ETA (Estimated time of arrival)-Distance

– ETA time

– Fuel Saving

– Back light ON/ OFF

Parts Description

1

Magnet

2

Cable ties

3

Battery

4

Bracket

5

Sensor

6

Damper for bicycle computer bracket

7

Bicycle computer battery cap

8

Bicycle computer

9

Primary functional value display

10

Function indicator

11

Secondary functional value display

12

LC display

13

MODE button (M)

14

Speed comparator display:

Compares the current speed with the average

speed

▲ higher than the average speed

▼ lower than the average speed

15

SCAN display

16

Maintenance interval display

17

Battery state indicator

18

Speed tendency:

This displays the trend in terms of whether the

speed is increasing (large bar, right) or

decreasing (small bar, left).

19

SET button (S)

Technical data

Battery: 3 V (Direct current)

(CR2032 button cell)

Operating temperature: 0–50 °C

Included items

1 Bike computer

1 Bracket with sensor

1 Magnet

6 Cable ties

1 Battery 3 V

(Direct current), type

CR2032 button cell

1 Operating instructions

General safety advice

KEEP ALL THE SAFETY ADVICE AND INSTRUC-

TIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

This product can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack

of experience and knowledge if they have been

given supervision or instruction concerning use

of the product in a safe way and understand

the hazards involved. Children shall not play

with the product. Cleaning and user

maintenance shall not be made by children

without supervision.

Please note that the warranty does not cover

damage arising from improper treatment, non-

observance of the operating instructions and

safety advice or unauthorised use.

Safety instructions for

batteries / rechargeable

batteries

DANGER TO LIFE! Keep batteries / recharge-

able batteries out of reach of children. If acci-

dentally swallowed seek immediate medical

attention.

DANGER OF EXPLOSION!

Never recharge non-rechargeable

batteries. Do not short-circuit bat-

teries / rechargeable batteries and / or open

them. Overheating, fire or bursting can be the

result.

Never throw batteries / rechargeable batteries

into fire or water.

Do not exert mechanical loads to batteries /

rechargeable batteries.

Risk of leakage of batteries / rechargeable

batteries

Avoid extreme environmental conditions and

temperatures, which could affect batteries /

rechargeable batteries, e.g. radiators / direct

sunlight.

Avoid contact with the skin, eyes and mucous

membranes. In the event of contact with battery

acid, thoroughly flush the affected area with

plenty of clean water and seek immediate

medical attention.

WEAR PROTECTIVE GLOVES!

Leaked or damaged batteries /

rechargeable batteries can cause

burns on contact with the skin. Wear suitable

protective gloves at all times if such an event

occurs.

In the event of a leakage of batteries /

rechargeable batteries, immediately remove

them from the product to prevent damage.

Only use the same type of batteries / recharge-

able batteries. Do not mix used and new

batteries / rechargeable batteries.

Remove batteries / rechargeable batteries if

the product will not be used for a longer period.

Risk of damage of the product

Only use the specified type of battery /

rechargeable battery!

Insert batteries / rechargeable batteries

according to polarity marks (+) and (-) on the

battery / rechargeable battery and the product.

Clean the contacts on the battery / rechargeable

battery and in the battery compartment before

inserting!

Remove exhausted batteries / rechargeable

batteries from the product immediately.

Before use

Remove the protective foil from the LC display

12

before first use.

Note: This product is not recommended to use

with E-bikes. Interference from the motor may affect

the performance of the product.

Inserting the battery

To insert the battery

3

, proceed as shown in Fig. A.

Note: You can calculate your tyre circumference

(U) by multiplying the tyre diameter (D) by 3.1416

(Fig. M). The list (Fig. N) features the tyre circumfer-

ences (U) of conventional tyre diameters (D).

- Unit of length: KM / KMH or MILE / MPH can be

select.

- Age: 2 digit number can be input.

- Unit of weight: KG or LB can be select.

- Weight: 3 digit number can be input.

- Time format: 12 or 24hrs can be select.

- Time: hour and min can be input.

- Date format: DD-MM-YY or MM-DD-YY can be

select.

- Date: Year, month and day can be input.

- CO2 saved: 3 digit number can be input.

- Maintenance interval: 3 digit number can be input.

Note: If the maintenance interval input “000” will

switch off the service indicator.

- Light ON / OFF: Switch ON or OFF the back

light. If selected back light ON, you can input the

back light ON and OFF time.

- ETA distance: 5 digit number can be input.

- ETA mode: CLOCK or TIME for select,

- Fuel format: LITER or GALLON can be select.

- Fuel cons: 3 digit number can be input.

- Unit of temperature: °C or °F can be select.

Confirm your choice using the SET button

19

.Press

the MODE button

13

to exit settings. You have

now successfully configured the basic settings.

If you wish to change the basic settings, please

follow the steps outlined in the chapter „Resetting

the bicycle computer“ and reset all basic settings.

Using the bicycle computer

Note: The bicycle computer will automatically

switch to standby mode when it has not been used

for over 5 minutes. Pressing any button or vibrations

will reactivate the computer. The function indicator

will show the current mode

Press the MODE button

13

repeatedly to scroll

through the different functions(see the chapter on

“Using the functions“). Press and hold the SET

button

19

to request or reset the saved values.

The bicycle computer features the follow-

ing functions:

ADVANCE mode: By pressing the MODE button

13

you can select the following function displays:

CLOCK > TOTALODO > TOTAL-TM > TRIPDIST

>MAXSPEED > AVGSPEED > TRIPTIME > TEMP >

STPWATCH > CAL RATE > CALORIE > FAT-BURN

> CO2 KG >FUELSAVE > ETA > KM+/- > TIME+/-

> SCAN

- CLOCK: Displays the time.

Press and hold the SET button

19

for 3 seconds

and press the SET button

19

again to request the

time and date settings.

TOTALODO: Total mileage counter.

Press and hold the SET button

19

for 3 seconds

and press the SET button

19

again to change the

tyre size, ODO and maintenance interval settings.

TOTAL-TM: Total trip time.

Press and hold the SET button

19

for 3 seconds

and press the SET button

19

again to change the

saved total trip time.

TRIPDIST: Trip distance.

Press and hold the SET button

19

for 3 seconds to

reset the trip distance, maximum speed, average

speed and trip duration to 0.

MAXSPEED: Maximum speed.

Press and hold the SET button

19

for 3 seconds to

set the maximum speed to 0.

AVGSPEED: Average speed.

Press and hold the SET button

19

for 3 seconds to

set the average speed to 0.

TRIPTIME: Trip time.

TEMP: Thermometer.

Press the SET button

19

to display the maximum

temperature value reached (HI). Press the SET button

19

again to display the lowest temperature value

reached (LO). Press the SET button

19

and keep it

pressed while the highest or lowest temperature is

displayed to return to the current temperature and

delete the saved information. Press and hold the

SET button

19

for 3 seconds and press the SET

button

19

again to request temperature unit setting.

STPWATCH: Stopwatch.

Press the SET button

19

to start the stopwatch.

Press the SET button

19

again to stop the stopwatch.

Press and hold the SET button

19

for 3 seconds to

set the stopwatch to 0.

CAL RATE: Current calorie consumption.

CALORIE: Calorie counter.

Press and hold the SET button

19

for 3 seconds to

set the calorie counter to 0.

FAT-BURN: Fat-burning in grams.

Press and hold the SET button

19

for 3 seconds to

set the fat-burning value to 0.

CO2 KG: CO2 saved.

Press and hold the SET button

19

for 3 seconds

and press the SET button

19

again to request the

reference value for CO2 setting.

FUELSAVE: Fuel save comparison with a car.

Press and hold the SET button

19

for 3 seconds

and press the SET button

19

again to request the

fuel unit and fuel consumption setting.

ETA: Expected time arrival.

Press and hold the SET button

19

for 3 seconds

and press the SET button

19

again to request the

ETA distance count down. Press the MODE button

13

and press the SET button

19

again request the

ETA time and ETA countdown timer for selected.

KM +/-: Kilometer counter.

Press and hold the SET button

19

for 3 seconds

and press the SET button

19

again to request the

kilometer counter settings. The LC display will show

the symbol for increasing or decreasing the number

(+ or -) and distance counter value.

TIME +/-: Timer.

Press and hold the SET button

19

for 3 seconds to

change the timer settings. The LC display will show

the symbol for increasing or decreasing the number

(+ or -) and timer counter value.

SCAN: Scan

Note: In scan mode, the display switches automat-

ically between the trip distance, maximum speed,

average speed and trip time.

Note: Refer to the „Basic settings“ chapter to

configure the settings.

Note: To deactivate scan mode press the Mode

button

13

to return to ADVANCE mode.

CUSTOMIZE mode

Alongside ADVANCE and EASY mode, you can

also apply your own settings in CUSTOMIZE mode.

There are two ways of requesting CUSTOMIZE

mode:

a) Press and hold the SET button

19

first and hold

the MODE button

13

to proceed to setting mode.

SETTING OPEN or SETTING RESET will be displayed.

Press the MODE button

13

until SETTING OPEN

displayed. Press the SET button

19

enter the setting

mode. Press the MODE button

13

will display

ADVANCE or EASY.

b) Press the SET button

19

enter to select ADVANCE

or EASY. By repeatedly pressing the MODE button

13

you can switch between the ADVANCE and

EASY modes. EASY mode, press and hold the

SET button

19

to request setting mode. Press the

SET button

19

again. Press the MODE button

13

to activate or deactivate individual settings

(i. e. CLOCK). Select „ON“ to add the selected

function to EASY mode. Select „OFF“ if you do

not wish to add the selected function to EASY

mode.

Removing the bike

computer from the bike

Slide out the bike computer by pressing down

the bracket lock (See Fig. L).

Cut off the protruding tails of the cable ties

2

with a suitable tool such as diagonal pliers.

Troubleshooting

Note: This product has delicate electronic compo-

nents. Therefore interference may occur when it is

near products which transmit radio signals.

- If errors occur in the display, remove any such

products from the vicinity of the product. In the

case of such malfunctions, remove the battery briefly

and then reinsert again.

Problem Solution

Empty LC-display or no

response after putting

the batteries in again

Remove battery. Insert

a sharp object (e.g.

screwdriver) into the

hole marked with “RE-

SET”. Insert a 3 V bat-

tery into the battery

compartment in such a

way that the + terminal

points upwards. Replace

the battery cover on the

battery compartment.

The microprocessor is

reset and restarted.

Speed or distance are

not displayed.

Adjust magnet and

sensor correctly.

- Check that the battery

is inserted with the

poles arranged the

right way round.

Problem Solution

Display is black The ambient tempera-

ture is too high or the

bike computer was ex-

posed to direct sunlight

for too long. Remove

product from direct sun-

light and let it cool off

for a while.

The LC-display shows

irregular symbols.

Remove battery and

replace it again.

Cleaning and care

Do not use any liquids or cleaning agents for

cleaning. Otherwise there is a risk of damaging

the product.

The product should only be cleaned on the

outside with a soft, dry cloth.

Maintenance

Remove the battery when the product will not

be used for longer period of time.

Check regularly the cable and components for

any damage and safe fit.

Disposal

The packaging is made entirely of recyclable

materials, which you may dispose of at local

recycling facilities.

b

a

Observe the marking of the packaging

materials for waste separation, which

are marked with abbreviations (a) and

numbers (b) with following meaning:

1–7: plastics / 20–22: paper and

fibreboard / 80–98: composite

materials.

The product and packaging materials

are recyclable, dispose of it separately

for better waste treatment. The Triman

logo is valid in France only.

Contact your local refuse disposal

authority for more details of how to

dispose of your worn-out product.

To help protect the environment, please

dispose of the product properly when it

has reached the end of its useful life and

Cd = cadmium, Hg = mercury, Pb = lead. That is

why you should dispose of used batteries /

rechargeable batteries at a local collection point.

Warranty

The product has been manufactured to strict quality

guidelines and meticulously examined before deli-

very. In the event of product defects you have legal

rights against the retailer of this product. Your legal

rights are not limited in any way by our warranty

detailed below.

The warranty for this product is 3 years from the date

of purchase. Should this product show any fault in

materials or manufacture within 3 years from the

date of purchase, we will repair or replace it – at

our choice – free of charge to you.

The warranty period begins on the date of purchase.

Please keep the original sales receipt in a safe

location. This document is required as your proof

not in the household waste. Information

on collection points and their opening

hours can be obtained from your local

authority.

Faulty or used batteries / rechargeable batteries

must be recycled in accordance with Directive

2006/66/EC and its amendments. Please return

the batteries / rechargeable batteries and / or the

product to the available collection points.

Environmental damage through

incorrect disposal of the bat-

teries / rechargeable batteries!

Batteries / rechargeable batteries may not be dis-

posed of with the usual domestic waste. They may

contain toxic heavy metals and are subject to haz-

ardous waste treatment rules and regulations. The

chemical symbols for heavy metals are as follows:

of purchase. This warranty becomes void if the pro-

duct has been damaged, or used or maintained

improperly.

The warranty applies to defects in material or

manufacture. This warranty does not cover product

parts subject to normal wear, thus possibly conside-

red consumables (e.g. batteries) or for damage to

fragile parts, e.g. switches, rechargeable batteries

or glass parts.

Računalo za bicikl

Uvod

Čestitamo vam na kupnji novog proizvoda. Ovom

kupnjom odlučili ste se za visokokvalitetan proizvod.

Uputa za uporabu je sastavni dio ovog proizvoda.

Ona sadrži važne upute o sigurnosti, uporabi i

uklanjanju otpada. Prije upotrebe proizvoda upo-

znajte se sa svim njegovim uputama za korištenje i

sigurnosnim uputama. Koristite ovaj proizvod u skladu

s navedenim uputama te u navedene svrhe. Ukoliko

proizvod dajete nekoj drugoj osobi, predajte toj

osobi također i sve upute.

Namjenska uporaba

Proizvod je namijenjen za uporabu kao računalo za

bicikl. Nije namijenjen za komercionalno korištenje.

14

Prikaz usporedbe brzine:

Uspoređuje aktualnu brzinu sa prosječnom

brzinom

▲ veća od prosječne brzine

▼ manja od prosječne brzine

15

SCAN-zaslon

16

Prikaz intervala održavanja

17

Prikaz statusa baterije

18

Trend brzine

Ovo prikazuje razvoj, da li se brzina povećava

(veliki stupac, desno) ili se smanjuje (mali stupac,

lijevo).

19

SET-tipka (S)

Tehnički podatci

Baterija: 3 V (istosmjerna struja)

(CR2032 dugmasta ćelija)

Radna temperatura: 0–50 °C

Opseg isporuke

1 računalo za bicikl

1 držač sa sensorom

1 magnet

6 kabelskih vezica

1 baterija 3 V

(istosmjerna struja), tip

CR2032 dugmasta

ćelija

1 upute za uporabu

Opće sigurnosne

upute

SAČUVAJTE SVE SIGURNOSNE NAPOMENE I

UPUTE ZA UBUDUĆE!

Ovaj proizvod mogu koristiti djeca od 8godina

i starija djeca, kao i osobe s umanjenom psihič-

kom, senzoričkom i mentalnom sposobnošću ili

s pomanjkanjem iskustva, ako su pod nadzorom

ili ako su upoznati sa sigurnom uporabom pro-

izvoda i razumiju opasnosti koje proizlaze iz

nje. Djeca se ne smiju igrati s proizvodom.

Čišćenje i održavanje ne smiju obavljati djeca

bez nadzora.

Molimo uzmite u obzir, da jamstvo ne pokriva

štete koje nastanu nepropisnim rukovanjem,

nepridržavanjemuputa za uporabu i sigurnosnih

uputa ili uporabom od strane neovlaštenih

osoba.

Sigurnosne upute za

baterije / punjive baterije

OPASNOST PO ŽIVOT! Baterije / punjive

baterije držite podalje od djece. U slučaju

gutanja odmah potražite liječničku pomoć!

OPASNOST OD EKSPLOZIJE!

Nikada ne punite baterije koje nisu

namijenjene za punjenje. Ne pravite

kratki spoj na baterijama / punjivim baterijama

i ne otvarajte ih. Posljedice mogu biti pregrija-

vanje baterije, požar ili eksplozija.

Ne bacajte baterije / punjive baterije nikada u

vatru ili vodu.

Ne izlažite baterije / punjive baterije nikakvom

mehaničkom opterećenju!

Opasnost od curenja baterija / punjivih

baterija

Izbjegavajte ekstremne uvjete i temperature koje

mogu djelovati na baterije / punjive baterije,

npr. radijatore / izravno izlaganje suncu.

Ako su punjive baterije / jednokratne baterije

iscurjele, spriječite dodir kože, očiju i sluznica

sa kemikalijama! Odmah isperite pogođena

mjesta čistom vodom i potražite liječnika!

NOSITE ZAŠTITNE RUKAVICE!

Iscurjele ili oštećene baterije /

punjive baterije mogu uzrokovati

ozljede kiselinom, ako dođu u kontakt s kožom.

Stoga u takvom slučaju obavezno nosite odgo-

varajuće zaštitne rukavice.

U slučaju da baterije / punjive baterije iscure,

odmah ih izvadite iz proizvoda, da biste sprječili

oštećenja.

Uvijek koristite baterije / punjive baterije istog

tipa. Ne miješajte stare baterije / punjive

baterije s novima!

Odstranite baterije / punjive baterije, ako

proizvod duže vremena nije u uporabi.

Opasnost od oštećenja proizvoda

Upotrebljavajte isključivo baterije / punjive

baterije navedenog tipa!

Umetnite baterije / punjive baterije prema obi-

lježenim polovima (+) i (-) na bateriji / punjivoj

bateriji i proizvodu.

Prije umetanja očistite kontakte na bateriji /

punjivoj bateriji i u pretincu za baterije!

Odmah odstranite slabe baterije / punjive

baterije iz proizvoda.

Prije puštanja u rad

Prije prve uporabe odstranite zaštitnu foliju sa

LC-zaslona

12

.

Napomena: ovaj proizvod se ne smije koristiti

na električnom biciklu. Motor može prouzročiti

smetnju funkcije proizvoda.

Umetanje baterije

Prilikom umetanja baterije

3

postupajte kao

što je prikazano na sl. A.

Za otvaranje pretinca za baterije koristite kova-

nicu. Okrenite s njom u smjeru suprotnom od

kretanja kazaljke na satu. Obratite pozornost

na to da ispravno umetnete bateriju u pretinac

za baterije (polaritet). Ovo je prikazano na

stražnjoj strani proizvoda.

Uvrnite poklopac pretinca za baterije sa kova-

nicom u smjeru kazaljke na satu na pretinac za

baterije, da biste ga zatvorili.

Pričvršćivanje računala

za bicikl

Da biste postavili proizvod, postupajte kao što

je prikazano na slikama B do I.

Napomena: osigurajte se da je kabel

ispravno pričvršćen. On se ne smije zapetljati

u žbice ili pored njih visiti.

Puštanje u rad

Mijenjanje osnovnih postavki

Osnovne postavke: jezik > profil primjene

> veličina gume > jedinica dužine > starosna dob

> jedinica težine > težina > format vremena >

vrijeme na satu > format datuma > datum > CO2-

ušteda> interval održavanja > svjetlo UKLJUČENO /

ISKLJUČENO > ETA-distanca > ETA-modus > format

goriva > potrošnja goriva > jedinica temperature

Važne funkcije

MODE-tipka

13

za konfiguriranje vrijednosti / SET-

tipka

19

za obradu i preuzimanje postavki

- Jezik: odabir iz 6 jezika

- Profil primjene: odabir između ADVANCE

(napredan) i EASY (jednostavan).

- Veličina gume: unesite opseg gume u mm, unos

četveroznamenkastog broja.

Napomena: veličinu gume (U) možete izračunati,

tako da promjer gume (D) pomnožite sa 3,1416

(sl. M). Popis (sl. N) sadrži opseg gume (U) uobi-

čajenih promjera guma (D).

- Jedinica dužine: odabir između KM/KMH ili

MILE / MPH.

- Starosna dob: unos dvoznamenkastog broja.

- Jedinica težine: odabir između KG i LB.

- Težina: unos troznamenkastog broja.

- Vremenski format: odabir između 12 i 24 sata.

- Vrijeme na satu: unos sata i minute.

- Format datuma: odabir između DD-MM-YY ili

MM-DD-YY.

- Datum: unos godine, mjeseca i dana.

- CO2 -ušteda: unos troznamenkastog broja.

- Interval održavanja: unos troznamenkastog broja.

Napomena: kada interval održavanja stoji na

„000“, izdaje se prikaz održavanja.

- Svjetlo ON / OFF (UKLJUČENO / ISKLJUČENO):

ON (UKLJUČUJE) ili OFF (ISKLJUČUJE) stražnje

osvjetljenje. Kada je uključeno stražnje osvjetlje-

nje, možete podesiti vrijeme UKLJUČIVANJA i

ISKLJUČIVANJA.

- ETA-distanca: unos petoznamenkastog broja.

- ETA-modus: odabir između CLOCK (vrijeme na

satu) i TIME (vrijeme vožnje),

BIKE COMPUTER

BIKE COMPUTER

Operation and Safety Notes

RAČUNALO ZA BICIKL

Upute za posluživanje i za Vašu sigurnost

IAN 292844

L

K

G

1

F

5

2

E

2

5

D

5

1

B

A

8

3

7

I

1

5

H

1 5

J

9

10

11

13

14

15

16

17

18

19

5

23 1

4 6

C

2

6

D

U

M N

D U

20

1598 mm

22

1759 mm

24

1916 mm

26

(650 A) 2073 mm

26,5

(Tubular) 2117 mm

26,6

(700 x 25C) 2124 mm

26,8

(700 x 28C) 2136 mm

27

(700 x 32C) 2155 mm

28

(700B) 2237 mm

ATB24

x 1,75 1888 mm

ATB26 x1,4 1995 mm

ATB26 x1,5 2030 mm

ATB26 x1,75 2045 mm

ATB26 x 2 (650B) 2099 mm

27

x 1 2138 mm

27

x 1 1 / 4 2155 mm

8

1

5

4

12

8

4

FAHRRADCOMPUTER

Bedienungs- und Sicherheitshinweise

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Crivit IAN 292844 Ciklokompjuter. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Crivit. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Crivit IAN 292844 Ciklokompjuter na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Crivit Ciklokompjuteri
Više priručnika za Ciklokompjuteri

Često postavljana pitanja o Crivit IAN 292844 Ciklokompjuter

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

Crivit IAN 87309 Ciklokompjuter

Priručnik

Crivit IAN 109642 Ciklokompjuter

Priručnik

Crivit IAN 103553 Ciklokompjuter

Priručnik

Crivit IAN 79107 Ciklokompjuter

Priručnik

Crivit IAN 275091 Ciklokompjuter

Priručnik

Crivit IAN 278500 Ciklokompjuter

Priručnik

Crivit IAN 270550 Ciklokompjuter

Priručnik

Crivit IAN 286004 Ciklokompjuter

Povezane kategorije