Priručnik Greenworks GD40BC Trimer za travu

Priručnik

6. Align the screw holes on the guard cap with the

screw holes on the guard.

7. Tighten the screws.

3.3 ASSEMBLE THE SHAFT

Figure 3.

1. Loosen the knob on the coupler.

2. Push in the release button on the lower shaft.

3. Align the release button with the positioning hole

and move the two shafts.

4. Turn the lower shaft until the button locks into the

positioning hole.

5. Tighten the knob.

3.4 ATTACH THE AUXILIARY HANDLE

Figure 4.

1. Remove the screws from the handle with a Phillips

screwdriver (not provided).

2. Attach the auxiliary handle and lower clamp on the

shaft.

3. Set the auxiliary handle in the comfortable position.

4. Tighten the screws.

3.5 INSTALL THE BATTERY PACK

Figure 5.

WARNING

• If the battery pack or charger is damaged, replace

the battery pack or the charger.

•

Stop the machine and wait until the motor stops

before you install or remove the battery pack.

• Read, know, and do the instructions in the battery

and charger manual.

1. Align the lift ribs on the battery pack with the

grooves in the battery compartment.

2. Push the battery pack into the battery compartment

until the battery pack locks into place.

3. When you hear a click, the battery pack is installed.

3.6 REMOVE THE BATTERY PACK

Figure 5.

1. Push and hold the battery release button.

2. Remove the battery pack from the machine.

4 OPERATION

IMPORTANT

Before you operate the machine, read and understand

the safety regulations and the operation instructions.

WARNING

Be careful when you operate the machine.

4.1 CONTROLS

4.2 START THE MACHINE

Figure 5.

1. Push the on/off button.

2. Push the lock-out button and pull the trigger.

3. Push the speed button to adjust the speed

according to the grass condition.

4.3 STOP THE MACHINE

Figure 5.

1. Release the trigger.

2. Push the on/off button again to turn the machine off.

4.4 OPERATION TIPS

Figure 6.

WARNING

Keep clearance between the body and the machine.

WARNING

Do not operate the machine without guard in place.

Do these tips when you use the machine

• Keep the machine connected to the correctly worn

harness.

• Keep a firm hold with the two hands on the machine

while you operate the machine.

• Cut tall grass from the top down.

If grass winds around the trimmer head:

• Remove the battery pack.

• Remove the grass.

4.5 CUTTING TIPS

Figure 7.

• Tilt the machine toward the area to be cut. Use the

tip of the cutting line to cut grass.

• Move the machine from right to left to prevent

thrown debris toward the operator.

• Do not cut in the dangerous area.

• Do not force the trimmer head into uncut grass.

• Wire and picket fences cause cutting line wear and

breakage. Stone and brick walls, curbs, and wood

can wear the cutting line quickly.

6

English

EN

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Greenworks GD40BC Trimer za travu. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Greenworks. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Greenworks GD40BC Trimer za travu na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Greenworks Trimeri za travu
Više priručnika za Trimeri za travu

Povezani proizvodi

Priručnik

Greenworks G24LT25К2 Trimer za travu

Priručnik

Greenworks G40LT Trimer za travu

Priručnik

Greenworks G40T5 Trimer za travu

Priručnik

Greenworks GD40BCB Trimer za travu

Priručnik

Greenworks G24LT30M Trimer za travu

Priručnik

Greenworks GD80BCB Trimer za travu

Priručnik

Greenworks G24LT Trimer za travu

Priručnik

Greenworks GD40BCBK25 Trimer za travu

Povezane kategorije