Priručnik Parkside IAN 85969 Klipna pila

Priručnik

9 GB

e) Look after the device carefully. Check

that moving parts are working prop-

erly and move freely. Check for any

parts that are broken or damaged

enough to detrimentally affect the

functioning of the device. Have dam-

aged parts repaired before you use

the device. Many accidents have their origins

in poorly maintained electrical power tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations drawn up for this par-

ticular type of device. In doing this, take

into account the working conditions

and the task in hand. The use of electrical

power tools for purposes other than those in-

tended can lead to dangerous situations.

5. Service

a) Have your device repaired at the ser-

vice centre or by qualified specialist

personnel using original manufacturer

parts only. This will ensure that your device

remains safe to use.

Safety advice relating

specifically to sabre saws

To avoid the danger of injury, fire and

damage to your health:

Hold the device by the insulated han-

dle surfaces when performing work

where there is danger of the tool used

striking hidden electrical lines or its

own power cable. Contact with a live wire

could cause metal parts of the device to be-

come live and lead to electric shock.

J If you use the device outdoors, always connect

it through a residual current device (RCD) with

a maximum trip current of 30 mA.

J Securely support the workpiece. Use clamps or

a vice to grip the workpiece firmly. This is much

safer than holding it in your hand.

J Never support yourself by placing your hands

near or in front of the device or the workpiece

surface. A slip can result in injury.

J If a dangerous situation arises, pull the mains

plug immediately out of the mains socket.

J Always work with the mains lead leading away

from the rear of the device.

J

DANGER OF FIRE FROM FLYING SPARKS

!

Sawing metal creates flying sparks.

For this reason, always make sure that nobody

is placed in any danger and that there are no

inflammable materials near the working area.

NOXIOUS FUMES! Working

with harmful / noxious dusts represents a risk to

the health of the person operating the device

and to anyone near the work area.

Wear protective glasses and a dust

mask!

J Do not saw materials containing asbestos.

Asbestos is a known carcinogen.

J When sawing building materials, observe the

statutory requirements and the manufacturer’s

recommendations.

J Do not work on moist materials or damp surfaces.

J Switch the device on before you bring it into

contact with the workpiece.

CAUTION! Do not allow the blade to come

into contact with a solid object or the floor when

the device is operating – danger of kickback!

J The shoe

5

must always lie against the work-

piece when the device is sawing.

J Do not put the device down before it has been

switched off and has reached a standstill.

J Use only sharp, defect-free blades. Replace

cracked, bent or blunt saw blades immediately.

J Always keep the device clean, dry and free of

oil or grease.

Q

Original accessories /

attachments

J Use only the accessories detailed in

the operating instructions. The use of in-

serted tools or accessories other than those

General safety advice for electrical power toolsGeneral safety advice for electrical power tools

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Parkside IAN 85969 Klipna pila. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Parkside. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Parkside IAN 85969 Klipna pila na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Parkside Klipne pile
Više priručnika za Klipne pile

Često postavljana pitanja o Parkside IAN 85969 Klipna pila

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

Parkside IAN 295715 Klipna pila

Priručnik

Parkside IAN 414121 Klipna pila

Priručnik

Parkside IAN 310948 Klipna pila

Priručnik

Parkside IAN 420423 Klipna pila

Priručnik

Parkside IAN 61099 Klipna pila

Priručnik

Parkside IAN 71919 Klipna pila

Priručnik

Parkside PFS 710 D3 Klipna pila

Priručnik

Parkside IAN 310922 Klipna pila

Povezane kategorije