Priručnik Powerworks PD60CS40 Motorna pila

Priručnik

English (original instructions)

EN

DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET

21. Chain drive links

22. Cutter

23. Felling direction

24. Danger zone

25. Escape route

26. Direction of fall

27. Notch

28. Felling back cut

29. Hinge

30. Limb cut

31. Keep work off ground leave support limbs

until log is cut

32. Log supported along the entire length

33. Cut from top (over buck) avoid cutting

earth

34. Log supported one end

35. Under buck

36. Over buck

37. Log supported both ends

38. Bucking a log

39. Stand on uphill side when cutting because

log may roll

ASSEMBLY

This chain saw requires no assembly, but user

should know how to assemble the guide bar

and saw chain. Check the chain tensioning

and add oil as described later in this manual

before each operation.

ASSEMBLING THE GUIDE BAR AND SAW

CHAIN

See figure 2 - 7

Make sure remove the battery pack from the

unit. Wear protective gloves.

 Unscrew the sprocket cover tighten knob

and remove the sprocket cover.

 The saw chain should face in the direction

of chain rotation. If they face backwards,

turn the loop over.

 Place the chain drive links into the bar

groove.

 Position the chain so there is a loop at the

back of the bar.

 Hold the chain in position on the bar and

place the loop around the sprocket and

make sure it is correctly mounted. Make

sure the bar hole ts well with bolt for saw

chain tension.

 Replace the sprocket cover, turn the

chain tension adjust knob clockwise until

the saw chain is properly tensioned. The

guide bar must then be pushed upwards,

check chain tension again, do not tension

the chain too tight.

 After the chain is well-tensioned, tighten

the knob again.

NOTE: The saw chain is properly tensioned if,

in the middle of the guide bar, it can be lifted

3mm to 4mm from the edge of the guide bar.

Start the saw again with a new saw chain,

allowing it to run-in for 2~3 minutes.

WARNING

After the run-in time, check the chain tension

and retighten the chain if necessary.

OPERATION

For complete charging instructions,

refer to the Operator’s Manuals for your

Greenworks Tools battery pack and

charger models.

NOTE: To avoid serious personal injury,

always remove the battery pack and keep

hands clear of the lock-out button when

carrying or transporting the tool.

BEFORE EACH USE CHECK THE CHAIN

TENSION

2

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Powerworks PD60CS40 Motorna pila. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Powerworks. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Powerworks PD60CS40 Motorna pila na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Powerworks Motorne pile
Više priručnika za Motorne pile

Često postavljana pitanja o Powerworks PD60CS40 Motorna pila

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

Powerworks PD60PS Motorna pila

Priručnik

Parkside IAN 340600 Motorna pila

Priručnik

Greenworks CD40CS15 Motorna pila

Priručnik

Stihl MS 151 TC-E Stihl Motorna pila

Priručnik

Güde KS 500 B Motorna pila

Priručnik

AL-KO EKS 2000/35 Motorna pila

Priručnik

EGO CS1401E Motorna pila

Priručnik

Florabest IAN 79271 Motorna pila

Povezane kategorije