Priručnik Ryobi EAG750RS Kutna brusilica

Priručnik

3

English

GB

FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR

Rated speed 11,000 min

-1

11,000 min

-1

Overall length 310 mm 310 mm

Net weight 2.35 kg 2.4 kg

NOTE: Be sure to check the nameplate on the product,

because the voltage is subject to change depending on

the area in which the product is to be used.

Maximum circumferential speed of grinding wheel: 4,800

m/min

Example of calculation:

3.14 x 125 x 11,000/1,000

=

4,320

Circumferential speed of

grinding wheel

4,320

Wheel diameter 125

Rated speed of grinder 11,000

STANDARD ACCESSORIES

 Auxiliary handle

 Wrench

A grinding wheel is included in the standard accessories

for some countries.

OPERATION

See Figure 3.

WARNING

Keep safety guards in place. Never cover the air vents

since they must always be open for proper motor

cooling.

The key to ef cient operating is controlling the pressure

and surface contact between the disc and work piece. Flat

surfaces are ground at an acute angle, usually 10 to 20

degrees with the work piece. Allow the disc to reach full

speed before starting to grind. Too great an angle causes

concentration of pressure on a small area which may

gouge or burn work surface.

SWITCH

See Figure 2.

 This tool is started and stopped by sliding and

releasing the switch.

 For the convenience of continuous operation, slide the

switch along then press the front end down to lock it.

 To release the lock, press the rear end of the switch.

MOUNTING THE GRINDING WHEEL

See Figure 4-5.

 Attach the disc flange and the wheel on the spindle

before fitting the clamp nut.

 Ensure that the wheel is correctly seated over the boss

on the disc flange and clamp nut.

 Depress the lock button located on the right side of

gear case.

 Using the wrench provided, tighten the clamp nut in a

clockwise direction.

WARNING

Check carefully whether or not there are cracks in the

wheel. Replace a cracked wheel immediately.

TOOL-LESS WHEEL GUARD

See Figure 6-7.

Release the wheel guard lock lever then turning the tool-

less wheel guard to the desired position. The maximum

turning axle is 90° on either side; otherwise the guard can't

be locked.

LIVE TOOL INDICATOR

This tool features a live tool indicator which illuminates as

soon as the tool is connected to the supply. This warns the

user that the tool is connected and will operate when the

switch is pressed.

MAINTENANCE

After use, check the tool to make sure that it is in good

condition.

It is recommended that you take this tool to a Ryobi

Authorized Service Center for a thorough cleaning and

lubrication at least once a year.

WARNING

Do not make any adjustments while the motor is in

motion.

Always disconnect the power cord from the socket

before changing removable or expendable parts

(grinding disc, cutting disc, etc.), before lubricating or

working on the unit.

WARNING

To ensure safety and reliability, all repairs should be

performed by an authorized service center or other

quali ed service organization.

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Ryobi EAG750RS Kutna brusilica. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Ryobi. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Ryobi EAG750RS Kutna brusilica na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Ryobi Kutne brusilice
Više priručnika za Kutne brusilice

Često postavljana pitanja o Ryobi EAG750RS Kutna brusilica

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

Ryobi EAG750RB Kutna brusilica

Priručnik

Ryobi EAG2000RS Kutna brusilica

Priručnik

Ryobi RAG18115-0 Kutna brusilica

Priručnik

Ryobi CAG180M Kutna brusilica

Priručnik

Ryobi R18AG-0 Kutna brusilica

Priručnik

Ryobi RAG18X-0 Kutna brusilica

Priručnik

Ryobi RAG18125-0 Kutna brusilica

Priručnik

Ryobi EAG-8512R Kutna brusilica

Povezane kategorije