Home > Uradi sam > Nasumične orbitalne brusilice > Ryobi Nasumične orbitalne brusilice > Ryobi R18ROS-0 Nasumična orbitalna brusilica

Priručnik Ryobi R18ROS-0 Nasumična orbitalna brusilica

Trebate priručnik za svoj Ryobi R18ROS-0 Nasumična orbitalna brusilica? U nastavku možete pogledati i besplatno preuzeti PDF priručnik na hrvatskom jeziku. Ovaj proizvod trenutno ima 4 često postavljanih pitanja, 0 komentara i ima 0 glasova. Ako ovo nije priručnik koji želite, kontaktirajte nas.

Vaš je proizvod neispravan i priručnik ne nudi rješenja? Otvorite Repair Café za besplatne usluge popravka.

Priručnik

English

Safety, performance, and dependability have been given

top priority in the design of your random orbital sander.

INTENDED USE

The random orbital sander is intended to be used only

by adults who have read and understood the instructions

and warnings in this manual, and can be considered

responsible for their actions.

The product is intended for sanding and finishing metal,

wood, plastics, or similar materials using the abrasive

pads provided. The product should only be used in well

ventilated areas.

The product should only be used in well ventilated areas.

The product is designed for dry sanding only. Do not use

for wet sanding.

The product is intended for consumer use only.

Do not use the product for any other purpose. Use of the

product for operations different from intended could result

in a hazardous situation.

WARNING

Dust from certain paints, coatings, and other materials

may cause irritation or allergic reactions. Dust from

wood, such as oak, beech, MDF, and similar materials

can be carcinogenic. Only qualified specialists should

be allowed to use the product on materials containing

asbestos.

WARNING

Do not use compressed air to remove dust from the

product. Dirt and grit blown away by compressed air can

cause serious eye injury.

WARNING

Read all safety warnings, instructions, illustrations

and specifications provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

RANDOM ORBITAL SANDER SAFETY WARNINGS

■ Always wear safety goggles and a dust mask when

sanding, especially sanding overhead.

■ A suitable breathing respirator must be worn while

sanding lead paint, some woods and metal to avoid

breathing the harmful/toxic dust or air. Contact with

or inhalation of dust produced from these materials can

endanger the health of operator and bystanders.

■ Do not throw sanding dust on an open fire because

materials in fine particle form may be explosive.

■ Do not use the product for wet sanding.

■ Do not use sanding paper larger than needed. Extra

paper extending beyond the sanding pad can also

cause serious lacerations.

■ When not in use, all tools should be disconnected from

power source.

■ Caution, fire hazard! Avoid overheating the object being

sanded as well as the sander. Always empty the dust

collector before taking breaks.

■ Protect the battery against heat (e.g., continuous

intense sunlight and fire), water, and moisture.

■ Properly dispose of dropped or damaged battery

immediately.

■ Clamp workpiece with a clamping device.

Unclamped workpieces can cause severe injury and

damage. Do not hold the material you are sanding by

hand.

■ Do not apply excessive pressure to the product.

■ Ambient temperature range for tool during operation is

between 0°C and 40°C.

■ Ambient temperature range for tool storage is between

0°C and 40°C.

■ The recommended ambient temperature range for the

charging system during charging is between 10°C and

38°C.

ADDITIONAL BATTERY SAFETY WARNING

WARNING

To reduce the risk of re, personal injury, and product

damage due to a short circuit, never immerse your

tool, battery pack or charger in uid or allow a uid to

ow inside them. Corrosive or conductive uids, such

as seawater, certain industrial chemicals, and bleach

or bleach containing products, etc., can cause a short

circuit.

■ Ambient temperature range for battery during use is

between 0°C and 40°C.

■ Ambient temperature range for battery storage is

between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national

provisions and regulations.

Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries

or conductive materials while in transport by protecting

exposed connectors with insulating, non-conductive caps

or tape. Do not transport batteries that are cracked or

leaking. Check with the forwarding company for further

advice.

Ocjena

Ostavite ocjenu proizvoda Ryobi R18ROS-0 Nasumična orbitalna brusilica i recite nam što mislite o njemu. Želite podijeliti svoje iskustvo s proizvodom ili postaviti pitanje? Ostavite komentar na dnu stranice.

Jeste li zadovoljni s Ryobi R18ROS-0 Nasumična orbitalna brusilica?
Da Ne

Prvi ocijenite ovaj proizvod

0 glasovi

Pridružite se razgovoru o ovom proizvodu

Ovdje možete podijeliti što mislite o Ryobi R18ROS-0 Nasumična orbitalna brusilica. Ako imate pitanja, prvo pažljivo pročitajte priručnik. Zahtjev za priručnik možete izvršiti putem našeg obrasca za kontakt.

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Ryobi R18ROS-0 Nasumična orbitalna brusilica. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Ryobi. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Ryobi R18ROS-0 Nasumična orbitalna brusilica na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Marka	Ryobi
Model	R18ROS-0
Kategorija	Nasumične orbitalne brusilice
Vrsta datoteke	PDF
Veličina datoteke	5.06 MB

Svi priručnici za Ryobi Nasumične orbitalne brusilice
Više priručnika za Nasumične orbitalne brusilice

Često postavljana pitanja o Ryobi R18ROS-0 Nasumična orbitalna brusilica

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Trebam li nositi masku protiv prašine kada koristim brusilicu? Potvrđeno

Da. Tijekom brušenja otpušta se prašina koja može prouzročiti oštećenje dišnih putova. Neke površine također mogu ispuštati kemikalije poput boje ili laka tijekom brušenja. To su također dobar razlog za nošenje maske protiv prašine.

Ovo je bilo korisno (4) Čitaj više

Trebam li nositi zaštitu za oči kada koristim brusilicu? Potvrđeno

Da. Malene čestice mogu poletjeti tijekom brušenja. Kada pogodiju oko, mogu prouzročiti trajno oštećenje oka. Zbog toga je uvijek potrebno nositi zaštitu za oči.

Ovo je bilo korisno (3) Čitaj više

Trebam li nositi zaštitu za sluh kada koristim brusilicu? Potvrđeno

Da trebao bi. Iako se količina buke koju proizvodi brusilica može razlikovati od marke do modela, dugotrajna izloženost jakoj buci može trajno oštetiti sluh. Zbog toga je dobro nositi zaštitu za sluh.

Ovo je bilo korisno (3) Čitaj više

Mogu li pohraniti električne alate u šupi ili garaži? Potvrđeno

Općenito, električni alat možete pohraniti u šupu ili garažu, čak i ako se tamo ponekad smrzne. Ipak, za životni vijek električnog alata bolje je čuvati ga na suhom mjestu bez većih temperaturnih oscilacija. U šupi ili garaži, razlike u temperaturi mogu uzrokovati stvaranje kondenzacije, što može uzrokovati hrđu. Osim toga, alati koji rade na baterije traju kraće i ne pune se dobro na vrlo niskim temperaturama. Kako biste bili sigurni kako vaš električni alat treba biti pohranjen, uvijek temeljito pročitajte korisnički priručnik.

Ovo je bilo korisno (2) Čitaj više