Priručnik Ryobi R18RS7-0 Klipna pila

Priručnik

Safety, performance, and dependability have been given

top priority in the design of your reciprocating saw.

INTENDED USE

The reciprocating saw is intended to be used only by

adults who have read and understood the instructions and

warnings in this manual and can be considered responsible

for their actions.

With appropriate blades fi tted, the reciprocating saw is

designed to cut wood, plastics, drywall and metal up

to the depth described in the specifi cations table. The

reciprocating saw is designed for handheld use; it is not to

be mounted onto a workbench unless specifi c instructions

are given about how to do this by the manufacturer of the

product.

Do not use the product for any other purpose.

WARNING

Read all safety warnings, instructions, illustrations

and specifications provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, fi

re and/or serious injury.

Save all warnings and instructions for future reference.

RECIPROCATING SAW SAFETY WARNINGS

■ Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give the

operator an electric shock.

■ Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the workpiece by hand or against your body leaves it

unstable and may lead to loss of control.

■ Ambient temperature range for tool during operation is

between 0°C and 40°C.

■ Ambient temperature range for tool storage is between

0°C and 40°C.

■ The recommended ambient temperature range for the

charging system during charging is between 10°C and

38°C.

WARNING

Make sure both the blade clamp lever and lock lever are

fully fl

ipped down before connecting the battery pack or

turning the product on. Failure to heed this warning could

result in serious personal injury.

ADDITIONAL BATTERY SAFETY WARNINGS

WARNING

To reduce the risk of fi

re, personal injury, and product

damage due to a short circuit, never immerse your

tool, battery pack or charger in fl uid or allow a fl uid to

fl ow inside them. Corrosive or conductive fl uids, such

as seawater, certain industrial chemicals, and bleach

or bleach-containing products, etc., can cause a short

circuit.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national

provisions and regulations.

Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries

or conductive materials while in transport by protecting

exposed connectors with insulating, non-conductive caps

or tape. Do not transport batteries that are cracked or

leaking. Check with the forwarding company for further

advice.

■ Ambient temperature range for battery during use is

between 0°C and 40°C.

■ Ambient temperature range for battery storage is

between 0°C and 20°C.

RESIDUAL RISKS

Even when the reciprocating saw is used as prescribed, it is

still impossible to completely eliminate certain residual risk

factors. The following hazards may arise and the operator

should pay special attention to avoid the following:

■ Injury caused by vibration

– Use the lowest speed setting which achieves the

task. Limit exposure. See “Risk Reduction”.

■ Injury caused by dust

– Wear eye protection at all times. Wear appropriate

dust mask with suitable filters that can protect

against particles from the material being worked on.

Do not eat, drink, or smoke in the work area. Ensure

adequate ventilation.

■ Electric shock

– The blade may contact hidden wiring causing

parts of the product to become live. Always hold

the product by the designated handles and take

care when blind cutting into walls and floors where

cables may be hidden.

NOTE: When working on walls, ceilings, or floors, take

care to avoid electric cables and gas or water pipes.

The product must be operated with both hands.

■ Injury from contact with the cutting blade

– The blades are very sharp and will become hot

during use. Wear gloves when changing blades.

Keep hands away from the cutting area at all times.

Clamp the workpiece whenever possible.

■ Injury caused by noise

– Prolonged exposure to noise will increase the risk

of hearing damage, and the effects are cumulative.

When using power tools for any extended period of

time, wear hearing protection.

RISK REDUCTION

It has been reported that vibrations from handheld tools

may contribute to a condition called Raynaud’s Syndrome

in certain individuals. Symptoms may include tingling,

numbness and blanching of the fi ngers, usually apparent

upon exposure to cold. Hereditary factors, exposure to

cold and dampness, diet, smoking, and work practices

are all thought to contribute to the development of these

symptoms. There are measures that can be taken by the

operator to possibly reduce the effects of vibration:

1 English |

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

EL

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Ryobi R18RS7-0 Klipna pila. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Ryobi. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Ryobi R18RS7-0 Klipna pila na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Ryobi Klipne pile
Više priručnika za Klipne pile

Često postavljana pitanja o Ryobi R18RS7-0 Klipna pila

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

Ryobi RRS1801M Klipna pila

Priručnik

Ryobi RRS18X-0 Klipna pila

Priručnik

Ryobi RRS18-0 Klipna pila

Priručnik

Ryobi ERS-80V Klipna pila

Priručnik

Ryobi ERS80VHG Klipna pila

Priručnik

Ryobi RRS18C-0 Klipna pila

Priručnik

AL-KO JS 2015 Klipna pila

Priručnik

AEG BMS 18 C Klipna pila

Povezane kategorije