Priručnik SilverCrest IAN 301634 Dozator za sapun

Priručnik

10 GB/CY

Setup / First use

Place the product on a suitable, level

surface.

Open the lid

1

.

Pull the plug

2

from the soap refill

opening

3

.

Pour liquid soap into the soap tank.

Note: During filling, note the "Max"

mark that is visible, if you look into the

soap tank. Never exceed the "Max"

mark when filling with soap! Otherwise,

the product may overflow (see Fig. A).

Note: Pour in at least 70 ml of soap;

otherwise, the "Fill level" indicator

13

will flash.

Replace the plug

2

in the soap refill

opening

3

.

Remove the protective film from the

display

9

and close the lid

1

. The

product is now ready for use.

Display indicators

Note: The display indicators are only visible

if the lid

1

is open.

The “Soap quantity” indicator

12

shows

the amount of soap dispensed for each

use.

The “Fill level” indicator

13

shows how

much soap remains in the soap tank.

The fewer bars are visible, the less soap

there is in the soap tank. If only one bar

remains the “Fill level” indicator

13

be-

gins to flash. Refill the soap tank.

Note: Pour much soap in the soap tank

until the display stops flashing.

The “Battery” indicator

14

shows the

charge level of the batteries that have

been inserted. If only one bar remains

you should replace the batteries soon.

Using the product

Set the quantity of soap you want dis-

pensed for each use. Press the “+” button

10

or “-” button

11

repeatedly until the

desired setting is displayed. You can se-

lect from four soap quantities. The more

drops displayed in the “Soap quantity”

indicator

12

, the more soap is dispensed.

Hold your hand underneath the soap

outlet

8

. The product starts dispensing

soap.

As soon as dispensing stops, you can

withdraw your hand.

Note: The soap dispensing also stops

as soon as you withdraw your hand. This

is true even if the programmed quantity

has not yet been dispensed.

If you do not intend to use the product

for long periods, press the “-” button

11

repeatedly until “OFF” appears in the

display

9

.

Press the “+” button

10

to turn the product

back on.

Note: If you need to remove a large

quantity of soap from the soap tank, you

can let the soap dispensing run for 30

seconds: Press the „+“ button

10

and

the „-“ button

11

simultaneously and

hold them for about three seconds. The

product begins dispensing soap and stops

after 30 seconds.

Note: If you have not used the product

for several days, you may have to activate

the soap dispensing function several

times in a row before soap is dispensed

again.

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj SilverCrest IAN 301634 Dozator za sapun. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate SilverCrest. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj SilverCrest IAN 301634 Dozator za sapun na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za SilverCrest Dozatori za sapun
Više priručnika za Dozatori za sapun

Često postavljana pitanja o SilverCrest IAN 301634 Dozator za sapun

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

SilverCrest SSSES 1.5 B1 Dozator za sapun

Priručnik

SilverCrest IAN 316055 Dozator za sapun

Priručnik

SilverCrest IAN 321942 Dozator za sapun

Priručnik

SilverCrest SSDES 280 A1 Dozator za sapun

Priručnik

SilverCrest IAN 304340 Dozator za sapun

Priručnik

SilverCrest IAN 315108 Dozator za sapun

Priručnik

SilverCrest IAN 337896 Dozator za sapun

Priručnik

SilverCrest IAN 309966 Dozator za sapun

Povezane kategorije