Priručnik Skil 7615 AB Tračna brusilica

Priručnik

8

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• The noise level when working can exceed 85 dB(A); wear

ear protection

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Wear protective gloves, safety glasses, close-tting

clothes and hair protection (for long hair)

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• When sanding metal, sparks are generated; do not use

dust box/vacuum cleaner and keep other persons and

combustible material from work area

DURING USE

• Always keep the cord away from moving parts of the tool;

direct the cord to the rear, away from the tool

• Do not touch the running sanding belt

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

AFTER USE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

EXPLANATION OF SYMBOLS ON TOOL

3

Read the instruction manual before use

4

Double insulation (no earth wire required)

5

Do not dispose of the tool together with household waste

material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• On/o switch

2

- switch on/o the tool by pulling/releasing trigger A

! before the sanding surface reaches the workpiece,

you should switch on the tool

! 

the workpiece

• Switch locking for continuous use

2

- pull trigger A

- press knob B with your thumb

- release the trigger

- unlock the switch by pulling again trigger A and then

releasing it

• Quick-changing of sanding belts (CLIC system)

6

! disconnect the plug

- lift lever C

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage



power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) SERVICE

a) 

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR BELT SANDERS

• Hold the power tool by insulated gripping surfaces,

because the sanding surface may contact its own

cord (cutting a “live” wire may make exposed metal parts

of the power tool “live” and could give the operator an

electric shock)

GENERAL

• This tool should not be used by people under the age of

16 years

• This tool is not suitable for wet sanding

• Never use the tool when the cord is damaged; it must be

replaced by a specially prepared cord available through

the service organization.

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Regularly clean the power tool’s air vents (the

motor’s fan will draw the dust inside the housing and

excessive accumulation of powdered metal may cause

electrical hazards)

• Always disconnect plug from power source before

making any adjustment or changing any accessory

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Do not continue to use worn, torn or heavily clogged

sanding belts

BEFORE USE

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Skil 7615 AB Tračna brusilica. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Skil. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Skil 7615 AB Tračna brusilica na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Skil Tračne brusilice
Više priručnika za Tračne brusilice

Često postavljana pitanja o Skil 7615 AB Tračna brusilica

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

Skil 1215 AA Tračna brusilica

Priručnik

Skil 7640 AA Tračna brusilica

Priručnik

Skil 1210 AA Tračna brusilica

Priručnik

Skil 1220 MA Tračna brusilica

Priručnik

Skil 7660 MA Tračna brusilica

Priručnik

Parkside IAN 68917 Tračna brusilica

Priručnik

Parkside IAN 285794 Tračna brusilica

Priručnik

Bort BBS-801N Tračna brusilica

Povezane kategorije