Priručnik Skil 7640 AA Tračna brusilica

Priručnik

7

• Quick-changing of sanding belts (CLIC system) 5

! disconnect the plug

- lift lever D

- remove sanding belt

- insert new belt with arrows printed at inner side of

belt pointing in same direction as arrow E on tool

- push lever back

! change sanding belts in time

! never fold sanding belts

In case belt runs off tool (mostly caused by inferior belt

quality), you should

- switch on the tool

- turn knob F 2 till the sanding belt is running in line

with the fl at side of the tool

- use new belt, if belt still runs off tool

• Dust suction 6

- empty dustbox G/dustbag H regularly for optimal

dust pick-up performance

- when using tool with vacuum cleaner, mount vacuum

cleaner adaptor J as illustrated

- when necessary, also clean the small fi lters as

illustrated

! do not use dustbox/dustbag/vacuum cleaner

when sanding metal

• Auxiliary handle 7

- loosen knob L almost completely

- adjust handle K to desired position

- tighten knob L fi rmly

• Holding and guiding the tool 8

! while working, always hold the tool at the grey-

coloured grip area(s)

- guide the tool parallel to the working surface

! do not apply too much pressure on the tool; let

the sanding surface do the work for you

- do not tilt the tool in order to avoid unwanted

sanding marks

- keep ventilation slots M 2 uncovered

APPLICATION ADVICE

• For sanding bare wood surfaces move the tool in

straight movements in line with the grain

• For sanding all other surfaces move the tool in oval

movements over the material

• For stationary use mount tool on workbench or vice 9

• Mount sanding frame N for equalizing surfaces

without scratches or grooves, and ensure it is in place

securely 0

! sanding frame N becomes hot during use; do not

touch it before it has cooled down

• Never use the same sanding belt for wood and metal

• Recommended sanding belt grits:

coarse - for removing paint;

for sanding of extremely rough wood

medium - for sanding of rough or plain wood

fi ne - for smoothing of wood;

for fi nishing of bare wood;

for smoothing surfaces with old paint

• Use different grit sizes when the working surface is

rough:

- start sanding with coarse or medium grit

- fi nish with fi ne grit

• For more tips see www.skileurope.com

• Vibration level

The vibration emission level stated at the back of this

instruction manual has been measured in accordance

with a standardised test given in EN 60745; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories, may

signifi cantly increase the exposure level

- the times when the tool is switched off or when it is

running but not actually doing the job, may

signifi cantly reduce the exposure level

! protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the

ventilation slots M 2)

- remove adhering sanding dust with a brush

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skileurope.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol ! will remind you of this when the need for

disposing occurs

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Skil 7640 AA Tračna brusilica. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Skil. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Skil 7640 AA Tračna brusilica na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Skil Tračne brusilice
Više priručnika za Tračne brusilice

Često postavljana pitanja o Skil 7640 AA Tračna brusilica

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

Skil 7660 MA Tračna brusilica

Priručnik

Skil 1215 AA Tračna brusilica

Priručnik

Skil 7615 AB Tračna brusilica

Priručnik

Skil 1220 MA Tračna brusilica

Priručnik

Skil 1210 AA Tračna brusilica

Priručnik

Parkside IAN 339668 Tračna brusilica

Priručnik

Einhell TP-BS 18/457 Li BL Tračna brusilica

Priručnik

Parkside IAN 89170 Tračna brusilica

Povezane kategorije