The infrared sensor is suitable for switching on
light automatically. The unit is not suitable for
burglar alarm systems as it is not tamperproof
in the manner prescribed for such systems.
Weather conditions may affect the way the
motion detector works. Strong gusts of wind,
snow, rain or hail may cause the light to come
on when it is not wanted because the sensor is
unable to distinguish sudden changes of tem-
perature from sources of heat. The detector
lens may be cleaned with a damp cloth if it
gets dirty (do not use cleaning agents).
Operation/Maintenance
This STEINEL product has been manufactured
with the utmost care, tested for proper operat-
ion and safety in accordance with applicable
regulations and then subjected to random
sample inspection. STEINEL guarantees that it
is perfect condition and proper working order.
The warranty period is 36 months, starting on
the date of sale to the consumer. We will rem-
edy defects caused by material flaws or manu-
facturing faults. The warranty will be met by re-
pair or replacement of defective parts at our
own discretion.
This warranty shall not cover damage to wear-
ing parts, damage or defects caused by im-
proper treatment or maintenance.
Further consequential damage to other objects
is excluded.
The warranty will only be honoured if the prod-
uct is sent to the appropriate Service Centre
fully assembled and well packed with a brief
description of the fault, receipt or invoice (date
of purchase and dealer's stamp).
Repair Service:
Our Customer Service Department will repair
faults not covered by warranty or occurring
after the warranty period has
expired. Please send the product
well packed to your nearest
Service Centre.
Functional warranty
This product complies with the European Dir-
ective on Low-Voltage Appliances, 73/23/EEC
and the EMC Directive 89/336/EEC.
Declaration of conformity
1918
Troubleshooting
Malfunction Cause Remedy
Sensor without power ■ Fuse faulty, not switched
ON, break in wiring
■ Short circuit
■ New fuse, turn on power
switch, check wiring with
voltage tester
■ Check connections
Sensor will not switch ON ■ Twilight control set to night-
time mode during daytime
operation
■ Bulb faulty
■ Power switch OFF
■ Fuse faulty
■ Detection zone not properly
targeted
■ LED flashes approx. once
a second, sensor in time
setting mode
■ Reset
■ Change bulb
■ Switch ON
■ New fuse, check connection
if necessary
■ Re-adjust
■ Press button
once
Sensor will not switch OFF ■ Continuous movement in the
detection zone
■ Light being operated in the
detection zone causing sen-
sor to responds as a result
of change in temperature
■ Light being operated is in
the manual override mode
(LED ON)
■ Check zone, adjusting if
necessary, or shroud
■ Change zone, or shroud
■ Deactivate manual override
Sensor keeps switching
ON/OFF
■ Lamp being operated in
the detection zone
■ Animals moving in the
detection zone
■ Change zone, shroud or
increase distance
■ Change zone, or shroud
Sensor responds when it
should not
■ Wind is moving trees and
bushes in the detection zone
■ Cars in the street are being
detected
■ Sunlight is falling onto the
lens
■ Sudden temperature changes
due to weather (wind, rain,
snow) or air expelled from
fans, open windows
■ Change detection zone
■ Change detection zone
■ Mount sensor in a sheltered
place or change detection
zone
■ Change detection zone,
change site of installation
Change in sensor's reach ■ Differing ambient tempera-
tures
■ Use shrouds to define detec-
tion zone precisely
LED flashing rapidly
(approx. 5 x per second)
■ Load connected is too high ■ Reduce load or use
contactor
GB
BDAL_IS3180_24spr_neu 21.11.2007 11:08 Uhr Seite 19
Pridružite se razgovoru o ovom proizvodu
Ovdje možete podijeliti što mislite o Steinel IS 3360 Detektor kretanja. Ako imate pitanja, prvo pažljivo pročitajte priručnik. Zahtjev za priručnik možete izvršiti putem našeg obrasca za kontakt.
odgovori | Ovo je bilo korisno (1) (Preveo Google)