Home > Razno > Pretvarači napona > Tronic Pretvarači napona > Tronic TSW 300 A1 Pretvarač napona

Priručnik Tronic TSW 300 A1 Pretvarač napona

Trebate priručnik za svoj Tronic TSW 300 A1 Pretvarač napona? U nastavku možete pogledati i besplatno preuzeti PDF priručnik na hrvatskom jeziku. Ovaj proizvod trenutno ima 0 često postavljanih pitanja, 0 komentara i ima 0 glasova. Ako ovo nije priručnik koji želite, kontaktirajte nas.

Vaš je proizvod neispravan i priručnik ne nudi rješenja? Otvorite Repair Café za besplatne usluge popravka.

Priručnik

- 7 -

• Inductive loads, for example, televisions or stereo

systems (devices with an inductor or a transformer)

often require a much greater switch on current

than resistance loads with the same specified

wattage. When switching on, television sets

demand much more power than that indicated

on the rating plate. Therefore it may be necessary

to switch the power inverter on and off several

times in order to switch the television set on.

• In the event of uncertainty, please consult the

manufacturer of the connected appliance.

Low battery signal

• When the battery runs low (under 11 V) a conti-

nuous signal tone sounds to indicate that the bat-

tery needs to be charged. The operation

LED/Overload indicator

continues to light up

green.

• When the battery voltage drops below 10 V the

power inverter switches off and the operation

LED/Overload indicator

lights up red.

Charging the USB device

Attention!

Before connecting, check to ensure that the

power consumption of the USB device is not

higher than 500 mA. Further information is to

be found in the operating manual for your

USB device.

• Plug the USB connector of the USB device to the

USB port

of the voltage converter.

• If necessary, switch the USB device on.

Note:

The 220-240 V power socket

and the USB

connector

can be used simultaneously.

Exchanging the Fuse

Risk of potentially fatal electrical

shock:

Disconnect the power inverter from the power

source before changing the fuse. Also remove

any devices connected to the power inverter.

Replace the fuse with an equivalent type in regard

to the specified technical data and with the same

shut-off characteristics.

Before switching on and resuming operations with

the voltage converter, establish the cause for the

triggering of the fuse.

To exchange the fuse, proceed as follows:

• Loosen the screw on the fuse holder

using a

Phillips screwdriver.

• Open the cover of the fuse holder

and pull

the flat car fuse from the holder.

• Install a new 40 A flat car-type fuse (supplied)

into the two connectors and replace the cover

onto the fuse holder

• Firmly screw the screw on the fuse holder

back in.

IB_71660_TSW300A1_GB_LB7.qxd 21.11.2011 16:40 Uhr Seite 7

Ocjena

Ostavite ocjenu proizvoda Tronic TSW 300 A1 Pretvarač napona i recite nam što mislite o njemu. Želite podijeliti svoje iskustvo s proizvodom ili postaviti pitanje? Ostavite komentar na dnu stranice.

Jeste li zadovoljni s Tronic TSW 300 A1 Pretvarač napona?
Da Ne

Prvi ocijenite ovaj proizvod

0 glasovi

Pridružite se razgovoru o ovom proizvodu

Ovdje možete podijeliti što mislite o Tronic TSW 300 A1 Pretvarač napona. Ako imate pitanja, prvo pažljivo pročitajte priručnik. Zahtjev za priručnik možete izvršiti putem našeg obrasca za kontakt.

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Tronic TSW 300 A1 Pretvarač napona. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Tronic. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Tronic TSW 300 A1 Pretvarač napona na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.