Priručnik EMOS E5018 Meteorološka stanica

Priručnik

2

AOK-5018B WIRELESS WEATHER STATION

The weather station displays the time along with 2 alarm clocks with snooze function, the weather forecast, interior and exterior temperatures, humidity,

the atmospheric pressure, lunar phase, the sunrise and sunset times, and also the moonrise and moonset times.

It has a memory for the minimum and maximum measured values.

Please read this product guide thoroughly before using the device.

GB

Specications:

Radio controlled clock

Accuracy: ±2 °C

Interior/exterior temperatures: 0 °C to +50 °C; -50 °C to +70 °C

Temperature resolution: 0.1 °C

Wireless sensor: broadcast frequency 433 MHz

Radio signal range: up to 30 m in free space

Number of sensors: 3

Relative humidity: 20 % – 95 %

Resolution: 1 %

Accuracy: ±5 %

Barometer pressure scale: 850 hPa to 1050 hPa

Power supply:

a) main station: 2× 1.5 V AA battery (not included)

b) sensor: 2× 1.5 V AAA battery (not included)

Size and weight:

a) main station: 189 × 139 × 30 mm; 306 g (without batteries)

b) sensor: 60 × 99 × 21 mm; 43 g (without batteries)

List of icons and buttons

Front display

A – interior temperature below

+4 °C

B – weather forecast icon

C – pressure trend

D – depleted battery icon

E – exterior sensor number

F – temperature trend

G – humidity trend

H – exterior temperature and

humidity

I – interior temperature and

humidity

J – physical comfort icon

K – date, day of the week, week

number

L – DCF77 radio signal reception

icon

M – alarm clock icons

N – current time

O – moonrise and moonset

P – country and city code

R – sunrise and sunset

S – lunar phase icon

T – pressure value and history

Rear side

Button push Button hold (3 seconds)

CHANNEL Sensor number Search for sensor No. 1,2 3

HISTORY

Pressure history over the

last 12 hours

Setting of altitude above sea

level, pressure units, weather

icon

-

1 step back

Display temperatures in

°C or °F units

Thermal limit setting

+

1 step forward

Display max/min tem

-

perature and humidity

values

MODE Alarm time No. 1, 2

Setting the alarm, time and

date

RESET Erase all values

Upper side

SNOOZE/LIGHT – Display light and snooze functions

Wireless sensor

Front side

- external temperature

- external humidity

CH1,2,3 – No. of channel reserved for communication of the sensor with

the weather station

Rear side

CH – switching for sensor channel

°C/°F – temperature units

Commissioning

1. First insert the battery into the weather station (2× AA), then to the

wireless sensor (2× AAA). When installing the batteries, ensure correct

polarity to avoid damaging the weather station or the sensor. Use alka

-

line batteries of the same type only; do not use rechargeable batteries.

2. Position both units next to each other. The weather station will nd

the signal from the sensor within three minutes. If the sensor signal

is not found, hold the CHANNEL button to repeat the search.

3. If the external temperature value vanishes from the display, push

theRESET button on the weather station. The weather station resets

all values to zero and nds the sensor signal again.

4. We recommend positioning the sensor on the northern side

of the house. In built-up areas, the sensor range may drop rapidly.

5. The sensor is resistant to splash and dripping water; do not subject

it to permanent contact with adverse weather and rain.

6. Do not put the sensor on metal surfaces; it might weaken the signal.

7. If the weak battery icon (D eld) appears, replace the batteries in the

sensor or the weather station.

Channel change and connecting more sensors

1. Use the CHANNEL button on the rear of the weather station to choose

the desired sensor channel - 1, 2 or 3. Then hold the CHANNEL button

until the icon starts blinking.

2. On the rear side of the sensor, remove the battery compartment cover

and insert the batteries (2× AAA).

3. Set the required number of the sensor channel - 1, 2, 3 using the CH

button – it will be shown on the front display. Within 3 minutes the

data from the sensor will be read.

4. If the sensor signal is not found, remove the battery and reinsert.

Radio controlled clock (DCF77)

After logging to the wireless sensor, the weather station starts to automa-

tically search for the DCF77 signal over 7 minutes, the L icon is blinking.

During the search no data on the display are updated and the buttons do

not function (except SNOOZE/LIGHT).

Signal found – the icon stops blinking and it shows the current time.

Signal not found – the icon disappears.

To start a new search for the DCF77 signal push the buttons + and – at

the same time.

To cancel the DCF77 signal search, push the buttons + and – at the same

time again.

The DCF77 signal will be synchronised daily between 2:00 and 3:00 a.m.

To ensure correct signal reception, do not place the sensor near electrical

appliances and mobile phones.

Manual setting of the time, date and location to

show the time of sunrise, sunset, moonrise and

moonset

1. Hold the MODE button

2. Use the buttons + and – to set the year – month - day – time shift – day

language - 12/24 time format – hour – minute – city (country) code.

Other cities and countries are listed on page 22 - 23.

3. The week number is set automatically according to the set date.

4. You can move from one value to another by pushing the MODE button.

5. After setting the city code, the weather station will set the time of

sunrise and sunset (R eld) and moonrise, moonset (O eld).

Interior and exterior temperatures, humidity,

temperature unit

The interior temperature and humidity is displayed in eld I.

Exterior temperature and humidity is displayed in eld H.

Button – choose the temperature unit °C/°F.

Temperature and humidity trend

The arrow shows the trend in the measured values of temperature (F icon)

and humidity (G icon) for the specic sensor or station.

Indicators on the

display

Temperature and humi-

dity trend

Rising Stable Falling

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj EMOS E5018 Meteorološka stanica. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate EMOS. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj EMOS E5018 Meteorološka stanica na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za EMOS Meteorološke stanice
Više priručnika za Meteorološke stanice

Često postavljana pitanja o EMOS E5018 Meteorološka stanica

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

EMOS E5059 Meteorološka stanica

Priručnik

EMOS E5060 Meteorološka stanica

Priručnik

EMOS E0352 Meteorološka stanica

Priručnik

EMOS E5068 Meteorološka stanica

Priručnik

EMOS E0211 Meteorološka stanica

Priručnik

EMOS E3003 Meteorološka stanica

Priručnik

EMOS E8466 Meteorološka stanica

Priručnik

EMOS E8825 Meteorološka stanica

Povezane kategorije