Priručnik Bosch GEX 125 AC Professional Nasumična orbitalna brusilica

Priručnik

that it clicks into place. Make sure that the plastic slider (13)

is partly within the bracket (12).

To empty the dust box (6), press the locking lever (15) on

the side of the dust box (). Remove the dust box by pulling

it downwards ().

Before opening the dust box (6), knock the dust box against

a firm surface as shown in the figure to loosen the dust from

the filter element.

Take hold of the dust box (6) by the recessed grip, fold the

filter element (16) upwards out of the way and empty the

dust box. Use a soft brush to clean the flaps of the filter ele-

ment (16).

External dust extraction (see figure D)

Attach the dust extraction adapter (17) to the extraction

outlet (14). Make sure that the locking levers of the dust ex-

traction adapter lock into place. A dust extraction hose with

a diameter of 19mm can be connected to the dust extrac-

tion adapter (17).

To remove the dust extraction adapter (17), press its lock-

ing levers down simultaneously and take off the dust extrac-

tion adapter.

The dust extractor must be suitable for the material being

worked.

When extracting dry dust that is especially detrimental to

health or carcinogenic, use a special dust extractor.

When working on vertical surfaces, hold the power tool with

the dust extraction hose facing downwards.

Self-generated dust extraction with dust bag (see figure

E)

A dust bag (accessory) (19) can be used for smaller jobs.

Before fitting the dust bag (19), remove the plastic slider

(13). Firmly attach the dust bag nozzle to the extraction out-

let (14). Make sure that the plastic slider (13) is partly

within the bracket provided for the dust bag (19).

Empty the dust bag (19) at regular intervals to maintain op-

timum dust collection.

Auxiliary Handle

The auxiliary handle (1) enables comfortable handling and

optimum power distribution, with a high sanding removal

rate in particular.

Use the screw (2) to secure the auxiliary handle (1) on the

housing.

Operation

Starting Operation

u Pay attention to the mains voltage. The voltage of the

power source must match the voltage specified on the

rating plate of the power tool. Power tools marked

230 V can also be operated at 220 V.

u Products that are only sold in AUS and NZ: Use a resid-

ual current device (RCD) with a nominal residual current

of 30 mA or less.

Switching On and Off

u Make sure that you are able to press the On/Off switch

without releasing the handle.

To switch on the power tool, press and hold the on/off

switch (4).

To lock the on/off switch (4) press and hold it while also

pushing the lock-on button (5).

To switch off the power tool, release the on/off switch (4).

If the on/off switch (4) is locked, press the switch first and

then release it.

Preselecting the orbital stroke rate

You can even preselect the orbital stroke rate during opera-

tion using the necessary orbital stroke rate preselection

thumbwheel (3).

1–2 Low orbital stroke rate

3–4 Medium orbital stroke rate

5–6 High orbital stroke rate

The required orbital stroke rate is dependent on the material

and the work conditions and can be determined using prac-

tical tests.

The Constant Electronic keeps the orbital stroke rate at no

load and under load virtually consistent, guaranteeing uni-

form performance.

After working at a low orbital stoke rate for an extended

period, you should operate the power tool at the maximum

orbital stroke rate for approximately three minutes without

load to cool it down.

Sanding Plate Brake

An integrated sanding pad brake reduces the orbital stroke

rate when running without load to prevent scoring when the

power tool is placed on the workpiece.

If the no-load orbital stroke rate constantly increases over

time, this means that the sanding pad is damaged and must

be replaced, or that the sanding pad brake is worn. A worn

sanding pad brake must be replaced by an after-sales ser-

vice centre authorised to work with Bosch power tools.

Working Advice

u Pull the plug out of the socket before carrying out any

work on the power tool.

u Always wait until the power tool has come to a com-

plete stop before placing it down.

u This power tool is not suitable for bench-mounted use.

It must not be clamped into a vice or fastened to a work-

bench, for example.

Sanding Surfaces

Switch the power tool on, place the entire sanding surface

against the surface of the workpiece and apply moderate

pressure as you move the sander over the workpiece.

The material removal rate and sanding result are primarily

determined by the choice of sanding sheet, the preselected

orbital stroke rate level and the contact pressure.

Only immaculate sanding sheets achieve good sanding per-

formance and make the power tool last longer.

English | 15

Bosch Power Tools 1 609 92A 49B | (07.05.2018)

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Bosch GEX 125 AC Professional Nasumična orbitalna brusilica. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Bosch. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Bosch GEX 125 AC Professional Nasumična orbitalna brusilica na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Bosch Nasumične orbitalne brusilice
Više priručnika za Nasumične orbitalne brusilice

Često postavljana pitanja o Bosch GEX 125 AC Professional Nasumična orbitalna brusilica

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

Bosch GEX 125 AVE Professional Nasumična orbitalna brusilica

Priručnik

Bosch GEX 34-150 Nasumična orbitalna brusilica

Priručnik

Bosch GEX 150 Turbo Nasumična orbitalna brusilica

Priručnik

Bosch GET 75-150 Nasumična orbitalna brusilica

Priručnik

Bosch GET 55-125 Nasumična orbitalna brusilica

Priručnik

Bosch GEX 125-150 AVE Professional Nasumična orbitalna brusilica

Priručnik

Bosch GEX 125-1 A Nasumična orbitalna brusilica

Priručnik

Bosch GEX 150 AVE Nasumična orbitalna brusilica

Povezane kategorije