Priručnik Bosch GEX 125 AC Professional Nasumična orbitalna brusilica

Priručnik

16 | English

1 609 92A 49B | (07.05.2018) Bosch Power Tools

Be sure to apply consistent contact pressure in order to in-

crease the lifetime of the sanding sheets.

Excessively increasing the contact pressure will not lead to

increased sanding performance, rather it will cause more

severe wear of the power tool and of the sanding sheet.

Do not use a sanding sheet for other materials after it has

been used to work on metal.

Use only original Bosch sanding accessories.

Rough Sanding

Attach a coarse grit sanding sheet.

Apply only light pressure to the power tool so that it runs at a

higher orbital stroke rate and a higher material removal rate

is achieved.

Fine Sanding

Attach a fine grit sanding sheet.

You can reduce the sanding plate orbital stroke rate by

lightly varying the contact pressure or changing the orbital

stroke rate level; the random orbit motion will be retained.

Move the power tool with moderate pressure flat on the

workpiece in a circular motion or alternately along and

across it. Do not tilt the power tool in order to avoid sanding

through the workpiece, e.g. veneers.

Switch the power tool off after completing operation.

Polieren

For polishing weathered lacquers and redressing scratches

(e.g. acrylic glass), the power tool can be fitted with an ap-

propriate polishing tool, e.g. lambswool bonnet, polishing

felt or polishing sponge (accessory).

Select a low orbital stroke rate (level 1–2) when polishing in

order to avoid heating up the surface excessively.

Apply the polish to an area slightly smaller than the area

which you intend to polish. Using the appropriate polishing

tool, work in the polish with either linear or circular move-

ments and with moderate pressure.

Do not allow the polish to dry out on the surface; this may

damage the surface. Do not expose the surface which you in-

tend to polish to direct sunlight.

Clean the polishing tool regularly to ensure good polishing

results. Wash the polishing tools with mild detergent and

warm water; do not use thinning agents.

Maintenance and Service

Maintenance and cleaning

u Pull the plug out of the socket before carrying out any

work on the power tool.

u To ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord

needs to be replaced, this must be done by Bosch or by a

customer service centre that is authorised to repair Bosch

power tools.

After-sales service and advice on using products

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or ar-

range the collection of a product in need of servicing or re-

pair.

Tel. Service: (0344) 7360109

E-Mail: [email protected]

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: (01) 4666700

Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: (01300) 307044

Fax: (01300) 307045

Inside New Zealand:

Phone: (0800) 543353

Fax: (0800) 428570

Outside AU and NZ:

Phone: +61 3 95415555

www.bosch-pt.com.au

www.bosch-pt.co.nz

Republic of South Africa

Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre

Johannesburg

Tel.: (011) 4939375

Fax: (011) 4930126

E-Mail: [email protected]

Ocjena

Više o ovom priručniku

Razumijemo da je lijepo imati papirnati priručnik za svoj Bosch GEX 125 AC Professional Nasumična orbitalna brusilica. Uvijek možete preuzeti priručnik s naše web stranice i sami ga ispisati. Ako želite imati originalni priručnik, preporučujemo da kontaktirate Bosch. Oni bi mogli osigurati originalni priručnik. Tražite li priručnik za svoj Bosch GEX 125 AC Professional Nasumična orbitalna brusilica na drugom jeziku? Odaberite željeni jezik na našoj početnoj stranici i potražite broj modela da vidite imamo li ga na raspolaganju.

Tehnički podaci

Svi priručnici za Bosch Nasumične orbitalne brusilice
Više priručnika za Nasumične orbitalne brusilice

Često postavljana pitanja o Bosch GEX 125 AC Professional Nasumična orbitalna brusilica

Naš tim za podršku pretražuje korisne informacije o proizvodu i odgovore na česta pitanja. Ako u častim pitanjima naiđete na netočne informacije, obratite nam se putem obrasca za kontakt.

Povezani proizvodi

Priručnik

Bosch GEX 125 AVE Professional Nasumična orbitalna brusilica

Priručnik

Bosch GEX 34-150 Nasumična orbitalna brusilica

Priručnik

Bosch GEX 150 Turbo Nasumična orbitalna brusilica

Priručnik

Bosch GET 75-150 Nasumična orbitalna brusilica

Priručnik

Bosch GET 55-125 Nasumična orbitalna brusilica

Priručnik

Bosch GEX 125-150 AVE Professional Nasumična orbitalna brusilica

Priručnik

Bosch GEX 125-1 A Nasumična orbitalna brusilica

Priručnik

Bosch GEX 150 AVE Nasumična orbitalna brusilica

Povezane kategorije